Adagio Teton Falls Wall Fountain
Illuminate any wall in your home or business with this fresh and clean looking water fountain. The Adagio Teton Falls Wall Fountain is one of Adagio's newest creations, developed after Adagio customers expressed their desire for a large wall fountain. With its featherstone slate or mirrored face and copper or stainless steel frame, you get a wall fountain that is over 5 feet wide and almost 4 feet tall! Despite its large size, this fountain is relatively lightweight. You get the same superior quality in the lightweight slate as you do with the mirrored style, making it easier to hang and handle. The illumination from the four lights in the hood with the beautiful waterfall sounds create a very soothing and relaxing ambiance.
Just like all Adagio fountains from Serenity Health, the Teton Falls Indoor Wall Fountain is prepped and ready for your customization. Create a custom wall fountain for your home or business with a wide range of options, including optional engraving. You can add your company's logo or a special image or phrase to this fountain for a one-of-a-kind wall hanging that's perfect for any relaxing living space, lobby, waiting room or office. It can be further customized with your preferred metal, face, edges, stone and even pebbles. Upgrade to LED lighting for an energy efficient way to keep this fountain well-lit!
Serenity Health & Home Decor is on hand to help you build the ideal custom residential or commercial interior fountain. To inquire further about customization or to get a free mock-up,e-mail usor give us a call at 888-881-4668.
- Comes complete with polished river rock, halogen lighting, and pump.
- Comes with EZ Installation Instructions and DVD
- On/Off pull chain allows you to run lights only, water only, or water and lights together.
- Dimmer Switch allows you to adjust the lighting to produce the desired ambiance.
- Optional: Stone Selection, Led Lights w/ Remote, Black Polished Pebbles, and Customized Logo
- Choose from Rajah FeatherStone Slate or Bronze or Silver Mirror
- Accent with a rustic copper frame or your choice of traditional stainless steel or blackened copper over stainless steel.
- Recirculating electric pump with manual fill, no auto fill device needed.
- Water flows smoothly down the face of the fountain, does not splash or spray.
- Go commercial and add a logo, Free Mock Up.
- Contact Us For Current Promotions! Price Match Guarantee!
- Talk to our Adagio product specialistswho are trained to answer any questions you may have, Call 888-881-4668
*Please note the images shown may differ from actual product. If you are choosing slate, every piece of slate is unique so no two are alike. You have the option above to do the stone selection and choose your own stone. See the additional info tab for more information on how the stone selection works.
Make your water feature work for you. Get your fountain custom engraved with your own logo or image. Simply provide us with a vector based eps file of your logo or image. It should be in an .eps file format. See some examples ofcustom engraved fountains.
Face Material (Example only for the slate, every piece varies):
Frame Options (Sample only, each piece may vary):
This fountain comes equipped with a pump which is covered by a manufacturer's 1 year limited warranty. If, however, in the future you would like a new pump, please view the Adagio Wall Fountain Replacement Pump.
Not finding the size or look you want? Request a custom water featurequoteand view some of our custom fountains.
We are authorized Adagio dealers and are trained to answer your questions so please do not hesitate to call us at 1-888-881-4668 and talk to an expert today.
Adagio designs and makes wall mounted and floor standing water features in Salt Lake City, UT. These are the highest quality water features available and are made right here in the US. You will find many beautiful finishes along with gorgeous stones to choose from to create the perfect fountain.
Adagio Teton Falls Fountain:
|FeatherStone Slate: |
If you are looking for the same beauty but with a lightweight option consider the FeatherStone Slate. It is a Slate Veneer that is framed by the metal choice you choose so you get the same slate look without the heavy weight of slate. This cuts the weight of your fountain down 70%. This lighter weight version is available in black, rajah and green featherstone slate on most of the Adagio water features.
Glass and Mirror Face:
These are just like they sound, the silver mirror looks just like your standard bathroom mirror, the bronze is tinted a bronze color. The Clear Glass, just like a window and the blue and green glass has a slight tint to it.
The Spillway Water Distribution System
Unlike many wall and floor fountains on the market where the water comes out of little holes on top and flows down in an uneven way, all the fountains in this series include a state-of-the-art Spillway Water Distribution System that creates 100% Water Coverage in the water flow.
NO DRIPPING OR LEAKING:
The fountains in this series come with an industrial strength 1/8" thick polypropylene plastic liner, form fitted into the metal tray. This keeps the fountain from dripping or leaking water. Before each fountain leaves the factory, it is water tested 3 times to make sure there is no dripping or leaking. (If you feel you have a leak the majority of the time the fountain was overfilled and water got outside of this plastic liner.)
Wall Fountain Installation:
These wall fountains can be installed on almost any type of wall, including cinder block walls and sheet rock walls with either wood or metal studs. The installation is relatively easy, but it does usually require two people to make it go more smoothly. Before installing the fountain, you can install an electrical outlet in the wall directly behind where the slate will be placed. This is not a requirement, but doing this will eliminate the visibility of the electrical wires and make the overall look of the fountain more beautiful. See below for details about electrical installation.
Comprehensive easy-to-read instructions with pictures are included as well as an EZ installation DVD.
Electrical Recommendations for Wall Fountains:
Although not required, you can install a GFI electrical outlet in the wall behind where the slate will be placed prior to installing the fountain. Doing so is more esthetically pleasing as it will enable you to keep the electrical cord hidden from sight. Place the electrical outlet near the center of the slate at least 18 inches above the fountain's lower tray (at the bottom) and at least 24 inches below the metal hood (at the top of the fountain). For the double and triple slate falls, the electrical outlet should be placed behind the left most slate as you face it on the wall.
If you choose to install an electrical outlet behind the slate, it is recommended that you wire it to a wall switch so you can easily turn your fountain on and off without having to reach for the plug behind the slate. Also, if you'd like to control the fountain's halogen lights and the water flow separately, it is recommended that you install an additional clock box outlet behind the slate, so there is one for the pump and one for the lights. Then you wire that to a double wall switch, so one switch controls the pump and the other one controls the fountain lights.
How often you have to add new water to the metal basin depends on the dryness or humidity of your environment. In the summer, water tends to evaporate more quickly, which means you will have to add water more often. In cooler months, you will probably not have to add water that often. You always want to have enough water in the basin so that the pump is fully submerged. If the pump is operating while it is not fully submerged, you can damage it over time.
It is highly recommended to use Distilled Water with these fountains. We realize that may not always be possible, but do your best. Regular tap water has minerals which can create mineral deposits in your fountain over time, and can possibly shorten the life of your water pump.
Choose your own stone for your wall fountain:
Being that each and every stone is completely unique from the next some customer opt to choose their own stone, especially useful if you have a very specific look in mind or are really looking for specific color schemes. On each product we try and show you examples of each just so you can get a feel for the coloring but the stone you receive will be different than anything you see because they are all unique.
For an additional cost you get photos of 5 different stones that are available at the time you order and could be used in your wall fountain. Simply choose this option on your order and we will email you a link to see the stones available in high quality digital images. You should have these within a week of placing your order. Once you receive the images of the slate you have 72 hours to select your stone. Once you make your selection the construction of your water feature will begin. This process will add about a week on to your processing time.
This is a Non-Refundable Charge and we do our best to meet your specifications on your color schemes. You must make your selection in 72 hours or the stones will be put back in inventory and may not be available again.Manufacturer's Warranty:
Each Adagio Water Features carries a year limited warranty. Please read the details here.
This Teton Falls Wall Fountain is really large and got just the size to fit my living room wall. Now I feel like I have a masterpiece of my own. This fountain has changed the whole environment of the living room and I just love it.
When I received the package I found out that two of the stones were missing from the package and it was damaged from the side. When I called you up I got it replaced in few days and the person who talked to us was very helpful also. Thanks for such a good customer service.
Adagio Teton Falls Glass Reflections Wall Fountain
Customers also Viewed
Adagio Reflection Creek Wall Fountain
Adagio Marble Sunrise Springs Wall Fountain
Adagio Sunrise Springs Wall Fountain